Your PC Ran into a Problem and Needs to Restart? If you are being troubled by such annoying issue, you have sầu come to the right place, for this article explains the best way lớn fix xanh screen error of death. No matter your PC can boot into lớn the Safe Mode or not, you will get a nice suggestion.

Bạn đang xem: Your pc ran into a problem and needs to restart

Sometimes when booting your Windows 10, you see a xanh screen which tells that your PC ran inkhổng lồ a problem and needs khổng lồ restart. If you try to lớn reboot again, the same screen. This issue is called BSOD (xanh screen error of death) as shown below:


The full error message can be:

"Your PC ran inkhổng lồ a problem & needs to restart. We"re just collecting some error info, and then we"ll restart for you."


"Your PC ran inkhổng lồ a problem that it couldn"t handle và now it needs to restart. You can search for the error online."

Along with the message is the specific stop code that can be:


If you have sầu no idea what to vì chưng when your PC ran inlớn a problem and needs lớn restart frozen, don"t worry, for you may get some clue after reading this article.

What Caused BSOD?

To be honest, it is hard khổng lồ tell the specific reason that brings blue screen error of death. Usually, your PC ran into a problem Windows 10 is caused by a hardware issue or hardware driver issue. And when Windows encounters a "stop error", Windows keeps crashing và you get a xanh screen.

But sometimes, your PC ran inkhổng lồ a problem loop can be caused by the followings:

Corrupted system tệp tin.A registry tệp tin gets deleted from System32 folder.Overheating problem.RAM is running at a higher percentage than the operating system can accept.Virus attaông chồng.Forceful shutdown.

It is funny that Windows points you lớn restart, but you keep receiving the same xanh screen after doing so. Seriously, the BSOD error can bring you data loss. Hence, it is urgent lớn recover lost data as well as find a way to lớn fix this xanh screen error of death.

Case A: Your PC Can Boot inlớn the Safe Mode

If your computer can still boot into Safe Mode, you got multiple ways to lớn fix your PC ran into lớn a problem & needs to lớn restart stuck. Please read the solutions khổng lồ blue screen error carefully and then pichồng up the ones you think reliable. And we hope you never go to the last one.

Tip: How khổng lồ enter the Safe Mode when Windows 10 cannot boot? In short, you need the help of Windows recovery drive sầu or Windows installation disk. To get the detailed instructions, read 7 Ways khổng lồ Boot inlớn Safe Mode in Windows 10.

Fix 1. Update the Drivers

Faulty driver can also bring "your PC ran inkhổng lồ a problem and needs to lớn restart" error. Please make sure all your device drivers are up-to-date. To do this, you need professional driver update tools to help you in Safe Mode.

Fix 2. Uninstall Recently Installed Applications

The high RAM can be caused by a recently installed application, further leading lớn xanh screen error of death. At this time, please reGọi what programs you installed recently và then your PC ran inkhổng lồ a problem and needs to restart.

When you are in Windows 10 Safe Mode, go to Programs & Features at the Start menu. Then kiểm tra & uninstall the programs that are installed recently.

Tip: While uninstalling an application in Windows Safe Mode, you are likely to lớn encounter an error message saying "The Windows Installer Service could not be accessed." At this time, you just need to lớn vì the followings:
Run CMD as an administratorType REG ADD "HKLMSYSTEMCurrentControlSetControlSafeBootMinimalMSIServer" /VE /T REG_SZ /F /D "Service"and press Enter.Type net start msiserver.Try uninstalling the program again.

Fix 3. Modify the Memory Dump Setting

This way is quite useful especially when the BSOD shows "your PC ran inlớn a problem và needs to restart memory management":

Step 1. In Safe Mode, right-click This PC on the desktop & select Properties option.

Step 2. Select Advanced system settings on the left of the System tab.

Step 3. Cliông xã on the Advanced tab in the upper side of the Properties window. Then under the Start-up and Recovery column click Settings.


Step 4. Under System failure topic, uncheck Automatically restart; under Write debugging information, clichồng on the drop-down thực đơn and select Complete memory dump option.


Step 5. Clichồng on the OK button & allow the restart.

Step 6. Cheông xã khổng lồ see if you still have sầu the error "your PC ran into a problem & needs lớn restart."

Fix 4. Run System File Checker

Step 1. In Windows 10 Safe Mode, run Commvà Prompt as Administrator.

Step 2. In the popped up comm& line window, type sfc /scannow and hit the Enter key. Let the system tệp tin checker finish và then reboot your PC & see if the xanh screen error appearing.


Tip: Also this can be done by using a Windows installation disk. To get into the Commvà Prompt, follow the path Repair your computer –> Troubleshoot –> Advanced –> Command Prompt.

Fix 5. Update Windows

There is a high possibility that your PC ran inlớn a problem và needs khổng lồ restart frozen can be fixed by Windows update. Now follow the guidance below:

Step 1. At Cortana tìm kiếm box, type update và choose Cheông chồng for updates from the best match.

Step 2. Right-click Cheông chồng for updates button & let Windows check for any update available now.


Step 3. Install all updates and restart your PC.

"Here are the solutions for your PC ran into a problem & needs to lớn restart. Tweet this article lớn help more users get out of the BSOD trouble."Click to lớn tweet

Case B: Your PC Cannot Boot into the Safe Mode

If you are unable lớn get your computer into Safe Mode, you may have sầu to try these suggestions to perform your PC ran inkhổng lồ a problem & needs lớn restart Windows 10 fix:

Fix 1. Run Startup Repair

Windows provides a Startup Repair tool lớn help fix Windows boot issues. But you will need the help of Windows recovery drive sầu or Windows installation disk.

Step 1. Use Windows recovery drive sầu or Windows installation disk to lớn boot your PC.

Step 2. When you see the option lớn install Windows, click Repair your computer instead. Then choose Troubleshoot –> Advanced Options –> Startup Repair.

Step 3. Select the target operating system to fix. Windows will initiate the repair & then restart.


Fix 2. Perform System Restore

If you have created system restore points before, you should be able to lớn roll your operating system khổng lồ a previous state when the applications and the registry files are still working in good condition.

Step 1. Also, go khổng lồ the Windows recovery environment.

Step 2. Select Troubleshoot -> Advanced options -> System Restore.

Step 3. Choose an trương mục to lớn continue (you may need to lớn enter the password as well).

Step 4. Click Next khổng lồ continue.


Step 5. Now select a restore point that will restore Windows baông xã to the date when you weren"t getting the blue screen error và click Next to lớn go on.


Step 6. Press Finish & then Yes lớn restore Windows.


Restart Windows when the System Restore tool has weaved its magic. In this way your PC ran inkhổng lồ a problem Windows 10 should have been fixed now. But if no restore point is available, apply the next solution.

Fix 3. Reset or Reinstall Windows

In case you still have this issue, we advise you khổng lồ reset/reinstall Windows operating system. But before you start, you have lớn recover some key files saved in the system partition as system resetting/reinstallation can clean the original system partition.

As your computer cannot boot, you will need the help of a professional Windows data recovery tool. MiniTool Partition Wizard is a good choice, for it not only helps to lớn recover lost files after mistaken deletion but also is capable of recovering files from lost/formatted partition. What"s more, its bootable truyền thông serves data recovery when computer fails to lớn boot.

Free DownloadBuy Now

Simple guidance here:

Step 1. Create a USB bootable media using its Bootable Media feature (see how to create a bootable truyền thông media here).

Step 2. Use the USB bootable truyền thông to boot your computer which suffers from BSOD (learn how lớn boot from MiniTool bootable media).

Step 3. Select the system partition lớn recover files from (drive sầu letter can be changed in the boot mode) and choose Data Recovery.


Step 4. Wait for Data Recovery tool to lớn finish the scanning of the system partition. During the process, you are able to kiểm tra each file khổng lồ see if it is the one you need. If Yes, mark the corresponding checkbox. 


Step 5. Finally, click Save to select a safe location (should be different from the system partition) for the recovered files.


For the detailed steps, please read our guide How to lớn Recover Data When PC Won"t Boot.

Once data recovery is completed, you have sầu the chance khổng lồ fix blue screen error of death without worrying about data loss.

Tip: To rephối Windows 10, follow this path: boot your computer using Windows installation disk, then select Repair your computer –> Troubleshoot –> Advanced Options –> Rephối This PC.

Related: Quickly Remove sầu "There was a Problem Resetting Your PC" - 2018 Update

To reinstall Windows 10, follow our guide here: How khổng lồ Install Windows 10 on a New Hard Drive (with Pictures).

"Here are the solutions for your PC ran into lớn a problem và needs khổng lồ restart. Tweet this article lớn help more users get out of the trouble."Cliông xã khổng lồ tweet

Now, What to Do?

After you have fixed your PC ran into a problem and needs lớn restart stuck, you had better create a Windows system image to lớn avoid the similar system error in the coming days. In this way you can quickly restore computer lớn an earlier state instead of spending so much time in finding solutions to lớn recover your computer.

We believe MiniTool ShadowMaker is a good assistant for you in this case. Simply put, MiniTool ShadowMaker is Windows backup software that is capable of backing up the Windows operating system, disk and partitions, và the files you appointed from different locations. In addition, it offers automatic backup options khổng lồ save sầu your effort. With one time setup, your computer gets lifetime system protection.

To back up the operating system using MiniTool ShadowMaker, you need to tải về the 30-day Free Trial edition now.

Free Download

Simple instructions here:

Step 1. When you are asked to register, you can input the license code or you can click Keep Trial. Then select This Computer khổng lồ connect.


Step 2. Go to Backup tab and then cliông chồng the Source tab as well as the Destination tab khổng lồ choose what to lớn baông xã up và where khổng lồ save the backup files. If you bởi not make any change, MiniTool ShadowMaker is mix to lớn bachồng up the running OS by default.


Step 3. Now you have sầu got more choices khổng lồ make (see the details below). When all is done, click Baông xã up Now. By doing these, your computer is automatically safeguarded in the coming days.

By clicking Schedule, you can mix the backup frequency such as daily/weekly/monthly backup;By entering Scheme, you are able khổng lồ let MiniTool ShadowMaker manage the disk space taken up by the backup files;By going to Options, you can make some changes to the backup image such as tệp tin compression. 


Step 4. Now go to Tools & follow the instructions khổng lồ create a bootable media. By doing this, at any time you want khổng lồ revert operating system khổng lồ an earlier point, you can use the bootable media khổng lồ help you perform a system restore when your PC ran into a problem Windows 10.

Xem thêm: Top 10 Manhua Hay Nhất Trung Quốc Hiện Đại Hay Nhất Không Thể Bỏ Qua

"MiniTool ShadowMaker is really helpful in automatic system protection. Don"t hesitate to lớn get this Windows system backup software lớn safeguard your operating system as well as the key files."Cliông chồng khổng lồ tweet

The Bottom Line

Reading here, you can try some fixes explained here & see if the xanh screen error of death is resolved. If you have sầu any suggestions on your PC ran into a problem & needs to restart Windows 10 fix, let us know by typing your ideas in the phản hồi zone below. For any questions towards MiniTool software, welcome lớn contact us via .

Your PC Ran into lớn a Problem

The issue of your PC ran inlớn a problem and needs khổng lồ restart is one of the Blue Screen of Death errors. It is a potential of system crash. The issue of your PC ran into lớn a problem and needs to lớn restart always caused by the hardware issue, driver issue, corrupted system files, registry tệp tin loss, overheating, virus attaông xã, forceful shutdown, etc.